The basic dimensions of the V-seals are as follows: (i.e for a V-25 A)

• d - The molded inside diameter of the V-seal = .087”
• d1 - The shaft range the V-seal is made to fit = .095-1.07
• d2 - The maximum I.D. of the counterface = d1 + 0.08
• d3 - The minimum O.D. of the counterface = d1 + 0.45
• A - I.D. width of the V-seal = .018
• B - O.D. width of the V-seal = 0.30
• C - V-seal cross section = 0.1
• B1 – V-seal fitted width = 0.24+/-0.03

• Parts of the V-Seal
• Installation
• Seal Function
• Speed
• Finishes
• Tolerances
• Seal Dimensions
• Materials
• Commitment